NSI-700S-90球面近场量测系统
Model 700S-90 is an ideal system for measuring medium and low gain antennas up to 60 inches (1.5 m) in diameter. It is well suited to perform cellular and PCS band base-station antenna testing. The 700S-90 uses a dual-axis theta-over-phi high accuracy stepper motor based positioning system with an adjustable extension arm for the probe. The system can support AUT loads of up to 300 lbs (136 kg). The location of the probe is adjustable to accommodate different configurations.The NSI-700S-90 uses an overhead dielectricly swing-arm for probe motion in the theta axis, and a dielectric AUT support stage for motion in the phi axis. The overall system is specifically designed to eliminate the adverse effects from interactions between the AUT and the surrounding environment. It is the ideal solution for providing complete 3D characterization of the antenna or wireless device.
The system interfaces with a wide variety of RF equipment and is capable of measuring amplitude and phase patterns from 0.5 GHz to 40 GHz. The Model 700S-90 includes NSI Antenna Measurement Software. The system software runs on a Windows based measurement workstation and provides automatic setup of scans based on measurement parameters and desired output. Measured data can be processed for far-field or holographic patterns yielding complete characterization of the antenna’s performance. A single data set provides information on antenna gain, side lobe structure, beam pointing and cross polarization.
- ScanArea 360° Phi and 330° inTheta
- L-band to mmWave Measurements
- Complete 3D characterization
- Dielectrics & optimized design to reduce reflections
- Automatic ElectronicAlignment Capability
- Optional wideband, dual-port probe 800 MHz to 6GHz or 500 MHz to 18 GHz
- CTIAOTAPerformanceTesting
- Far-field, Holographic and Near-field Patterns
- Far-field Measurement OptionsAvailable
| SPECIFICATIONS | |
| Construction | Theta, phi, and pol rotation stages with Dielectric overhead swing arm, steel support tower, aluminum vertical arm |
|---|---|
| Drive system | Precision Stepper Motors |
| Scan Area | Full spherical; Phi/Theta - 360° |
| Maximum Antenna Load | 300 lbs (136 kg) |
| Maximum Antenna Diameter: | 60 in (1.5 m) |
| Resolution | 0.01° phi and theta |
| Postition Repeatability | 0.03° RMS |
| Rotational Speed(Theta and Phi) | 40°/sec Phi, 10°/sec Theta |
| System Controller | NSI controller with parallel I/O, and serial interface. |
| Measurement Workstation | Measurement workstation computer with large LCD monitor. |
| Stepper Motor Power Amplifier | EIA 19” rack mount. (7” high x 14” deep) |
| Motor Cables | Quick-connect; 40’ (12 m) |
| Scanner Absorber | Absorber Kit (5” pyramidal cone) |
| Probe | WR90 Open-ended Waveguide Probe SMA (f) transition & Pyramidal absorber (3”) |
| RF Cables | 20 GHz RF Cables |
| Rotary Joint | Qty. 3 - DC-26.5 GHz, (Phi, Theta, Pol) |
| Supported RF Devices | NSI Panther Receiver Subsystem or selection of Agilent, Rohde & Schwarz and Anritsu VNA’s (contact NSI for a complete list) |
| Power | 100-240 VAC switchable, 47-63 Hz, 500 watts |
- Width - 146” (3.7 m)
- Depth - 146” (3.7 m)
- Height - 161” (4.1 m)
- Weight - 1,200 lbs (544 kg)
永远超越客户的期待
ALWAYS GOES BEYOND CUSTOMERS' EXPECTATIONS