NSI-700S-80球面近场量测系统
Model 700S-80 is an ideal system for measuring medium and low gain antennas up to 20 inches (0.5 m) indiameter and is ideally suited to perform cellular and PCS band base-station antenna testing. The 700S-80uses a dual-axis theta-over-phi high accuracy stepper motor based positioning system with an adjustableextension arm for the probe. The system is constructed of modular high strength aluminum and can supportloads of up to 165 lbs (75 kg). The location of the probe is adjustable to accommodate different configurations.
The system interfaces with a wide variety of RF equipment and is capable of measuring amplitude and phasepatterns from L-band to mmWave Bands. The Model 700S-80 includes NSI Antenna Measurement Software.
The system software runs on a Pentium based measurement workstation and provides automatic setup ofscans based on measurement parameters and desired output. Measured data can be processed for far-fieldor holographic patterns yielding complete characterization of the antenna’s performance. A single data setprovides information on antenna gain, side lobe structure, beam pointing and cross polarization.
The Model 700S-80 can be supplied with a variety of options to enhance system performance.
- Full 360° Scan Area
- L-band to mmWave Measurement
- Automatic Electronic Alignment Capability
- Far-field, Holographic and Near-field Patterns
- Far-field Measurement Options Available
| SPECIFICATIONS | |
| Construction | Theta, phi, and pol rotation stages with “L” bracket (aluminum) |
|---|---|
| Drive system | Precision Stepper Motors |
| Scan Area | Full spherical; Phi/Theta - 360° |
| Maximum Antenna Load | 165 lbs (75 kg) |
| Maximum Antenna Diameter: | 20 in (0.5 m) |
| Resolution | 0.01° phi and theta |
| Postition Repeatability | 0.03° RMS |
| Rotational Speed(Theta and Phi) | 180°/sec Phi, 10°/sec Theta |
| System Controller | NSI controller with parallel I/O, and serial interface. |
| Measurement Workstation | Measurement workstation computer with large LCD monitor. |
| Stepper Motor Power Amplifier | EIA 19” rack mount. (7” high x 14” deep) |
| Motor Cables | Quick-connect; 40’ (12 m) |
| Scanner Absorber | Absorber Kit (5” pyramidal cone) |
| Probe | WR90 Open-ended Waveguide Probe SMA (f) transition & Pyramidal absorber (3”) |
| RF Cables | 20 GHz RF Cables |
| Rotary Joint | Qty. 3 - DC-26.5 GHz, (Phi, Theta, Pol) |
| Supported RF Devices | NSI Panther Receiver Subsystem or selection of Agilent, Rohde & Schwarz and Anritsu VNA’s (contact NSI for a complete list) |
| Power | 100-240 VAC switchable, 47-63 Hz, 500 watts |
- Width - 72” (1.8 m)
- Depth - 72” (1.8 m)
- Height - 74 “ (1.9 m)
- Weight - 750 lbs (337 kg)
永远超越客户的期待
ALWAYS GOES BEYOND CUSTOMERS' EXPECTATIONS